iC-BL – BiSS Line Interface Master/ Slave with RS485 Transceiver
- BiSS Line slave resp. master
- Full BiSS Line protocol support including
- Cyclic Redundancy Check (CRC)
Description
iC-BL is the interface IC for the One-Cable Technology BiSS Line. It is applicable on both sides of the interface and provides full BiSS Line Master and Slave functionality. It enables a robust data transmission with high availability between serial interfaces (e.g. SPI and BiSS). Thus, it is suitable for various applications e.g. integration of a BiSS C sensor into BiSS Line and robust communication between two MCUs via 2- or 4-Wires.
Types and Packages
- iC-BL QFN28-5×5, RoHS compliant MSL 1, 260°C
Features
- BiSS Line slave resp. master
- Full BiSS Line protocol support including
- Cyclic Redundancy Check (CRC)
- Forward Error Correction (FEC)
- 2-wire and 4-wire BiSS Line interface support
- RS485 line transceiver for BiSS Line sensor network
- Operation at 5 V or from 7.0 to 30V,
- BiSS Line to BiSS C protocol transfer with :
- Sensor sided BiSS C master
- CMOS driver/receiver for BiSS C sensor network
- SPI™ slave interface
- Full BiSS C and BiSS safety related features capable
- BiSS C bus structure capable up to 8 BiSS C slaves with each 64 bit
- Selectable sensor supply voltage 2.5 V, 3.3V or 5 V
- Operating temperature range of -40° to +105°C
- Space-saving, 28-pin 5mm x 5mm QFN package
Application
- One-Cable-Technology BiSS
- Line encoder
- 2- and 4-wire sensor interface
- Multiple sensor devices
- BiSS C to BiSS Line adapter
- Torque sensor, Inclinometer,
- Acceleration sensor
- Diagnosis and Condition
- Monitoring extension
Evaluation kits available:
iC-BL Eval BL1D Evaluation Board
iC-BL EVAL BL1D is the evaluation board and suitable for testing the full functionality including BiSS Line Master operation and SPI interfaces.
iC-BL EVAL BL3M-1 BiSS Line Slave Module for BiSS C Sensors (2-Wire)
iC-BL EVAL BL3M is a module for simple integration of a BiSS C Sensor into the One-Cable Technology BiSS Line. Due to its design and configuration BL3M is only suitable for use at the BiSS Line Slave side and for BiSS C Sensors. The BL3M-1 has a 2-Wire BiSS Line interface implemented. For 4-Wire implementations see BL3M-2. To evaluate full functionality (e.g. SPI interface, BiSS Line Master functionality) the evaluation board BL1D can be used.
iC-BL EVAL BL3M-2 BiSS Line Slave Module for BiSS C Sensors (4-Wire)
iC-BL EVAL BL3M is a module for simple integration of a BiSS C Sensor into the One-Cable Technology BiSS Line. Due to its design and configuration BL3M is only suitable for use at the BiSS Line Slave side and for BiSS C Sensors. The BL3M-2 has a 4-Wire BiSS Line interface implemented. For 2-Wire implementations see BL3M-1. To evaluate full functionality (e.g. SPI interface, BiSS Line Master functionality) the evaluation board BL1D can be used.
iC-BL iCSY BL1U BiSS Line-to-PC USB Adapter
iC-BL iCSY BL1U is the BiSS Line adapter for evaluating, testing, and measuring of BiSS Line Slaves.
