µC Interface

Showing all 3 results

  • iC-JRX

    µC Interface, 2×4 24V High-Side Driver operates bidirectional and features load diagnosis.

    Features

    2 x 4 bidirectional 24V input/output stages.
    I/O mode programmable in 4-bit blocks<.
    Guaranteed high-side driving capability of 100mAdc and 500mApeak for pulse load.
    Short-circuit-proof drivers with high dielectric strength.
    Low saturation voltage of 0.6V ⁄ 100mA and 2.0V ⁄ 500mA.
    Integrated flyback circuits.
    Programmable PWM function.
    Flash mode for the outputs.
    Digital input filters with filtering times externally adjustable.
    Supply voltage and two-stage temperature monitoring.

    Datasheet

    iC-JRX Datasheet
     
    Manufacturer: iCHaus GmbH
    Read more

  • iC-JX

    µC Interface, 4×4 24V High-Side Driver operates bidirectional and features load diagnosis.

    Features

    16 bidirectional input ⁄ output stages at 24V.
    Input ⁄ output mode programmable in 4-channel blocks.
    500mA pulse and 150mA permanent load driving capability.
    Active flyback circuit.
    Load diagnosis for driver current, output voltage and impedance (cable fractures, short circuits etc).
    10-bit A ⁄ D converter for the generation of diagnosis measurement values.
    Logic supply from 3V upwards.
    Short-circuit-proof high-side drivers with diagnosis function.
    Voltage monitor, temperature sensor with warning and shut-down features, power output enable pin.
    Programmable interrupt generation with an events storage facility.
    Variable digital filters for the debouncing of I/O signals.
    Fast 8-bit parallel or serial SPI™-compatible µC interface permits use in buses.

    Datasheet

    iC-JX Datasheet
     
    Demo Board JX2D Datasheet
     
    Manufacturer: iCHaus GmbH
     
    Read more

  • iC-VRV

    µC Interface For 24V offers 2×4 low-side drivers.

    Features

    2×4 bidirectional input ⁄ output stages.
    I⁄O mode programmable in nibbles.
    100mAdc output current (500 mA peak).
    Saturation voltage of 0.4V (1.5V ⁄ 500mA).
    Integrated free-wheeling diodes with a common link to an external Zener diode.
    Short-circuit protection.
    Output voltage of up to 48V.
    Flasher function for outputs.
    Digital input filters, external time-setting.
    Fast µP interface.
    Interrupt generation on input data change.
    Thermal shutdown, low voltage detection.

    Datasheet

    iC-VRV Datasheet
     
    Manufacturer: iCHaus GmbH
     
    Read more